Added on 6/17/2013: CD015 COLD STOP TARGET:
Monday, December 10, 2012
Cold stop target
I installed a target in the cold stop last week- something that can tell us scale and orientation.
It was made with 0.65mm diameter wire, held in place with Al tape. Errors in parallelism are less than 0.3mm from end-to-end of any wire, but it remains to be seen how the whole thing cools down.
Added on 6/17/2013: CD015 COLD STOP TARGET:
Added on 6/17/2013: CD015 COLD STOP TARGET:
Subscribe to:
Post Comments (Atom)
1 comment:
I assume the drawing is not to scale if I'm reading the dimensions correctly. The left vertical wire is 4.5 mm from the edge of the circle and the right vertical wire is 10.4 mm from the left one (and so closer to the middle than drawn).
Post a Comment