Comments will be used to update this post. Any reason not to put in passwords?
Turn on the CWR power, and EBOX power supply. Lakeshore 12 mW power, to setpoint, 7.000K
Turn on bryce and zion mac minis on the PI Rack.
After bryce is at the login prompt, you will probably be unable to move the mouse or type with the keyboard. If this is the case go pull out and reinsert the mouse/keyboard USB from the back of zion.
passwords
bryce: m*****s
zion: R*******
On bryce, open up CORD terminal. Go to gus, ipadd:10.xxxxxx. The login is gus, 4s****.
On CORD/gus, open the labview program: Desktop: reed/Labview229/____.vi
At this point, go to CORD menu and open a full screen session- you'll have to log in again, but sometimes this is necessary to get labview to initialize.
On the CORD/gus desktop, double click on the ACQ icon (Mighty Green Triangle)
On bryce, open ~/Desktop/EXES_GUI/startgui.??
Should open within ~5 sec. If it takes 20 sec, then it hasn't linked up to labview. In which case it will inform you that it found all motor mechanisms out of their last positions.
It will often find SLIT/DECKER in slightly off positions. This is due to some voltage drifts/winding in the mechanisms and pots. Maybe. but it is normal.
From the GUI, go to the initialization panel, and press "connect", and then "machwinit". If machwinit is successful, it should tell you that it loaded 80 opts tables or something similar. "no echo from hardware" could be disconnected Ebox, or fiber to the ebox ... something with the ebox.
Pressing "Update" on the inits page will tell you the next file index and directory will be.
From the instrument control panel, the waveno0 and order fields will be empty on startup. If you know the echelle order that the system was left in you can enter it in the spinner and the hit the refresh button. Otherwise, you can enter a new waveno0 and order and hit "setup" for the GUIs recommended mechanism positions for that combo. Make adjustments and hit "Move all".
Setup files are loaded from the Obs Setup screen with a button at the bottom.
Hit load, the directory will be something like "~/setupfiles_jul-aug-2015" and then directories are listed by flight number. Pick the one you want and it will import all the mechanical positions and observation parameters (OTs for flat, nod, NODN, NINTs).
It will not know about necessary changes to: dispersion driver, frametime, subarray modes, V_bias.
Subscribe to:
Post Comments (Atom)
1 comment:
One thing to add: If you want to store the data into a different month directory, you need to edit c:\exes\inits\outputs.ini on gus. I changed missiondir and swclatest, although I don't swclatest is important. You also need to create the new CD???. I also created the cd???_yyyymon folder, but maybe that would have been done by the program.
Although I don't know if it was important, I restarted MGT after each edit.
Post a Comment